8
DO NOT
crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT
expose to temperatures above 40°C (104°F).
9
Use only the charging base to charge the SV108 series batteries.
WARNING!
Dispose of spent batteries correctly as they contain Lithium-ion.
DANGER! DO NOT
attempt to disassemble the
battery. For safety and environmental reasons
DO NOT
discard in domestic waste or by burning. ONLY discard or recycle
according to local authority regulations.
WARNING!
DO NOT
allow a leaking battery to contact your person.
2. INTRODUCTION
M
ains charger for Model No. CP108VBP and CP108VBP4 10.8V Lithium-ion Battery Pack. Suitable for use with the SV108 series.
3. SPECIFICATION
Model No.: ..........................................................
CP108VMC
Output .............................................................
10.8V DC 2.4A
Supply .................................................................
230V~50Hz
4. OPERATION
NOTE-:
When new, the batteries will have been shipped in a low charge state. Fully charge the batteries before using your tool.
4.1.
To remove the battery from the equipment, depress the spring loaded button on the battery pack. Remove the battery pack by sliding
out.
DO NOT
touch the metal battery terminals.
4.2.
The battery is designed to fit into the charger one way only. Insert the battery fully and firmly to seat the battery into the charging base.
4.3.
Take the base charger and plug it into the mains, switch on the power and the LED on the charger will illuminate.
4.4.
When the battery is on charge the red LED on the charger will illuminate.
4.5.
When the green LED on the Charger illuminates permanently the battery is fully charged.
4.6.
Remove the battery from the charger. Switch off and remove the plug from the mains.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Original Language Version
© Jack Sealey Limited
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
C
P108VMC Issue 1 02/03/21
