background image

cranking test

times                  1020ms

cranking              low             

replace              10.13V

        After testing is finished do not switch off engine, press the Enter Key to select Charging test.

5.4.3. 

  

Charging System and Rectifier Diode Test.

 

select charging test and press enter Key

 

note:- do not shut down the engine during test, all electrical appliances should be switched off, leaving lights etc. on will affect the  

 

test and the accuracy of the results.

 

 

the Battery tester will do the following tests in sequence:

ripple test

               

   95mV                  14.32V

 

the ripple test will display the real time ripple, it will also show the ripple volts and charging volt values.

 

it takes approx. 6 seconds for the ripple test. After the ripple test the tester will automatically start the loaded voltage test.

charging test

                      loaded  testing                           

                  *****

        loaded Volt testing takes approx. 3 seconds it will then prompt to increase engine speed.

charging test

increase rPm to 2500 r/min

And keep it 5 seconds

Press enter to continue.

 

increase engine speed to 2500 rev/min or above and maintain for 5 seconds.

 

the tester will start the charging test after increase in engine speed is detected.

charging test

                testing

                 *******

 

After the test has finished, the tester will display the effective charging volts,ripple test results and charging test results.

charging test

loaded          14.16V

unloaded       14.39V

replace         15mV

charging        normal

 

 

note: if no increase rev/min detected there is a fault with the alternator or wiring to the battery. 

 

the tester will try 3 more times to detect an increase, if this fails the test result displays “no volt output”

 

check the wiring between the alternator and battery and retest.

 

 

charging test results

 

a) charging Volt: normal

 

    charging system shows the alternator output as normal.

 

b) charging Volt: low

 

    charging voltage of the system is low.

            check alternator drive belt, check the connections between alternator and battery, if all are in good condition follow the             

 

    manufactures procedure to eliminate charging fault.

 

c) charging Volt: High

            the normal maximum high voltage is 14.7+/- 0.5V. if the charging voltage is too high, it will overcharge the battery. this will shorten  

 

    the battery life.

 

d) no Volt: output

 

     no alternator voltage output is detected. check the alternator connection cable and belt.

 

e) diode test

 

    When ripple volt is too high it shows that at least one diode is damaged. check and replace the diode.

  

5.5.    

battery out of vehicle test.

 

select “out of Vehicle” from main menu.

main menu

1. Quick test

2. Battery in Vehicle

3. out of Vehicle

4. review data

5. Print data

6. system setup

 

Original Language Version

© Jack sealey limited

 Bt105 | issue:1  09/05/16

Содержание BT105










Отзывы: