Original Language Version
© Jack sealey limited
Bt105 | issue:1 09/05/16
5.5.1.
select battery type
Battery type
1. regular flooded
2. AGm flat Plate.
3. AGm sprial
4. Gel
5. efB
Press Up/Down keys to select battery type then press enter key to confirm.
the battery tester will test each battery according to the selected system and rating.
Press Up/Down key to select according to the actual system standard and rating specified on the battery being tested.
select input
ccA
input correct rating and press enter Key. it takes approx. 3 seconds to display the battery test results.
select input
500
ccA
battery test results
good battery
Healthy:96% 490ccA
charge:98% 12.64V
internal r=6.1m
Ω
rated:500A
Good BAtterY
there is no problem with the battery and is ok to use.
good recharge
Healthy:78% 440ccA
charge:30% 12.2V
internal r=7.2m
Ω
rated:500A
Good, recHArGe
Good battery but low current, recharge before use.
replace
Healthy:46% 490ccA
charge:80% 12.68V
internal r=18.1m
Ω
rated:500A
rePlAce
Battery is near end or at end of life, replace battery.
bad Cell, replace
Healthy:0% 0ccA
charge:20% 10.64V
internal r=45.2m
Ω
rated:500A
BAd cell, rePlAce
Battery interior damaged, bad cell or short circuit, replace battery.
Charge, retest
Healthy:39% 310ccA
charge:20% 12.08V
internal r=30.1m
Ω
rated:500A
cHArGe - retest
unstable battery, recharge, retest. if the same test result appear after recharge and retest, the battery is damaged, replace battery.
After testing remove clips from battery and store in a dry, childproof location.