STEP 11
. To make the cabinet take panels 18, 19, 20, 21, 22 and
screw them together as in the diagram, making sure that on 18
the double bend lip is facing the front and that 19 and 22 have the
lipped edge facing each other and the same with 20 and 21.
AP2060 - 1 - 010507
STEP 9
. When the work surface is secure slide the drawer into the
slots that were fixed to the underside of the work surface at step 6.
STEP 10
. The righthand side of the lower storage area is going to
be made into a cupboard, to do this take the cupboard door (17)
and fix to the top and bottom panels of the lower storage area, as
shown in the diagram above.
The workstation is complete.
9
10
11
12
STEP 12
. Attach the back panels (23, 24). These fit inside the
bottom ledge of the base. Screw from the side and the bottom, as
shown above.
