5. OPERATION
5.1.
PREPARATION
5.1.1.
When positioning the drainer ensure that there are no spills of oil on the floor both prior to draining and afterwards. All spills should
be cleaned up immediately to prevent them becoming a slipping hazard.
5.1.2.
When positioning the drainer beneath the vehicle consideration should be given to accessing the sump plug. If necessary loosen
the plug before locating the drainer.
Note:
Remember that once the sump plug has been removed the escaping oil may be hot.
5.2.
COLLECTION OF WASTE OIL
5.2.1.
If unit has been used to drain a previous vehicle check to ensure that there is sufficient spare capacity within the reservoir before
you drain the next vehicle.
5.2.2.
Place the reservoir under the vehicle’s sump, remove the sump plug and put to one side.
5.2.3.
Allow the engine to drain.
5.2.4.
When draining is complete, remove the reservoir and wipe up any spillage. Remember to replace and tighten the sump plug using a
new sump washer.
5.3.
EMPTYING OF WASTE OIL FROM PAN UNIT
WARNING!
Dispose of all waste in accordance with local regulations.
5.4.
MANUAL PUMP DISCHARGE
5.4.1.
Attach the discharge hose to the outlet connection on the top of the pump and secure it with the worm drive clip provided. Place
the other end of the pipe into a suitable container and proceed to turn the pump handle clockwise until empty.
5.5.
After use thoroughly clean the exterior of the drainer and clear up any spills in the work area. Store the drainer in a suitable clean
dry place where it will not be a hazard.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
A
K468DXP Issue 1 06/01/2021
Original Language Version
© Jack Sealey Limited
