background image

 

sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

environMent protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

important

: no liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version

© Jack Sealey limited

AK459dX.V2  Issue 2  19/11/18

fig.9

Содержание AK459DX.V2

Страница 1: ...ny parts are damaged or missing as this may cause failure and or personal injury 8 8 DO NOT stand on the drainer 8 8 DO NOT adjust or tamper with the safety valve 8 8 DO NOT move the drainer by the hose or pull the hose sharply from the air supply 8 8 DO NOT place attachments close to your face and DO NOT point hose at other persons or animals 8 8 DO NOT allow untrained persons to operate the drai...

Страница 2: ... SUCTION 6 2 1 Open valve fig 6 4 completely by turning it counter clockwise Close the suction valve fig 6 1 close air valve fig 6 5 and close the drain valves fig 6 2 and fig 6 6 6 2 2 Connect the compressed air at 7bar 100psi to quick coupling fig 5 2 open the ball valve fig 5 1 and valve fig 5 4 Air will flow out of the muffler fig 5 3 6 2 3 When the arrow of the vacuum gauge approaches the red...

Страница 3: ...t from air supply and vent any pressure remaining in the reservoir by opening drainpan valve fig 8 5 and or air valve fig 7 2 NOTE The unit storage tank has been fitted with a safety valve factory calibrated to 0 5Bar 7 25psi NOTE Some cars have a built in suction probe In this case check vehicle manufacturer s data to determine the correct suction probe to be used fig 9 Original Language Version ...

Страница 4: ...he product becomes completely unserviceable and requires disposal drain any fluids if applicable into approved containers and dispose of the product and fluids according to local regulations Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Important No Liability is accepted for incorrect use...

Отзывы: