3.1. CHANGING THE BULB
WARNING!
Ensure the spotlight is turned off and the lens has cooled
prior to changing the bulb.
1. Remove the hood from the spotlight.
2. Carefully lift the hood and reflector assembly revealing the spring clip
(fig. 6.1.) and three wires.
3. Disconnect the three wires (fig. 6.2.). Make a note which wires
connect to which terminal.
4. Remove the spring clip (fig. 6.1.).
5. Pull bulb (fig.6.3) outward from the reflector.
6. Hold the new bulb with a lint free cloth, (do not handle the bulb), and
install by reversing the above procedure.
3.2. CHANGING THE BATTERY
WARNING! Ensure you read, understand and apply safety
instructions relating to the battery before changing.
1. Remove the rear rubber seal by way of the polymer knobs either side
(fig. 1B).
Unscrew them counter clockwise.
2. Remove battery braces with phillips screwdriver.
3. Securely grip the exposed end of the battery and carefully slide it a
few inches out of the housing (fig. 8).
4. Disconnect the battery terminal wires. Remove the black negative
wire first.
WARNING!
Beware of causing a
short circuit.
5. Carefully remove the battery.
6. Replace with genuine Sealey battery and install by reversing the
above procedure.
Note:
a) Take care not to pinch or cross-connect any wires.
b) When replacing rear rubber seal make sure that both knobs are
secure.
7. Dispose of old batteries in accordance with local authority lead-acid
battery regulations.
DO NOT
dispose of with regular refuse.
fig. 7
fig. 6
fig. 8
3. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AK438.V2 Issue: 3 - 20/12/11
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a
recycle centre and disposed of in a manner which is compatible
with the environment.
When the product is no longer required, it must be disposed of in
an environmentally protective way. Contact your local solid waste
authority for recycling information.
Battery Removal
WARNING!
ensure the spotlight is not connected to the
mains supply.
Follow section 3.2. for battery removal instructions.
•
Dispose of batteries according to local authority
•
guidelines
.
Under the Waste Batteries and Accumulators Regulations 2009,
Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are
registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is
BPRN00705
