SeaLevel ULTRA COMM+I.PCI 3055 Скачать руководство пользователя | Manualshive

Страница: 22 / 22

background image

Warranty

Sealevel Systems

ULTRA

COMM+I.PCI

Page

19

Warranty

Sealevel Systems, Inc. provides a lifetime warranty for this product. Should this
product fail to be in good working order at any time during this period, Sealevel
Systems will, at it's option, replace or repair it at no additional charge except as
set forth in the following terms. This warranty does not apply to products
damaged by misuse, modifications, accident or disaster.

Sealevel Systems assumes no liability for any damages, lost profits, lost savings
or any other incidental or consequential damage resulting from the use, misuse
of, or inability to use this product. Sealevel Systems will not be liable for any
claim made by any other related party.

RETURN AUTHORIZATION MUST BE OBTAINED FROM SEALEVEL
SYSTEMS BEFORE RETURNED MERCHANDISE WILL BE
ACCEPTED. AUTHORIZATION CAN BE OBTAINED BY CALLING
SEALEVEL SYSTEMS AND REQUESTING A RETURN
MERCHANDISE AUTHORIZATION (RMA) NUMBER.

Sealevel Systems, Incorporated
2779 Greenville Highway
P.O. Box 830
Liberty, SC 29657 USA
(864) 843-4343 FAX: (864) 843-3067
www.sealevel.com

email: [email protected]

Technical Support is available from 8 a.m. to 5 p.m. Eastern time.

Monday - Friday

Trademarks

Sealevel Systems, Incorporated acknowledges that all trademarks referenced in
this manual are the service mark, trademark, or registered trademark of the
respective company.

ULTRA COMM+I.PCI

is a trademark of Sealevel Systems, Incorporated.

«
...
20
21
22

Содержание ULTRA COMM+I.PCI 3055























Отзывы:

Нет отзывов

Похожие инструкции для ULTRA COMM+I.PCI 3055

Gigabit Network Set

Бренд: Hama Страницы: 6

Бренд: ICP DAS USA Страницы: 6

Бренд: AUDIOLINE Страницы: 2

Бренд: M-Audio Страницы: 56

Digitizer Capture Card - PCI RGB

Бренд: NCast Страницы: 10

Бренд: LT Security Страницы: 20

Бренд: Diamond Multimedia Страницы: 6

Бренд: Banksys Страницы: 8

Бренд: Compose Страницы: 17

Бренд: Honeywell Страницы: 44

Бренд: ultron Страницы: 12

Бренд: AmbiCom Страницы: 1

Бренд: AmbiCom Страницы: 2

Бренд: LS Страницы: 19

Бренд: Manhattan Страницы: 2

8400GS 256MB HDMI DVI

Бренд: Gainward Страницы: 2

Бренд: G4S Страницы: 2

Бренд: G4S Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды