Installation
Sealevel Systems
ULTRA
COMM+I.PCI
Page
7
Installation
Operating System Installation
For Windows Users
Start by choosing
Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The
ULTRA COMM+I.PCI
can be installed in any of the PCI expansion slots
and contains several jumper straps for each port that must be set for proper
operation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the
ULTRA COMM+I.PCI
into the slot. Make sure that the
adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.