SeaLevel SeaConnect 370, Руководство пользователя, Страница: 45 / 53

45
© Sealevel Systems, Inc. SeaConnect 370 Manual | SL9269 11/2022
To enable control of the module, click the “Get Module Settings” button. After a short delay, the information
for that I/O module should be displayed. If no information appears, verify the host settings are correct and
make changes, if necessary.
After Get Module Settings is clicked, the “Module Description” frame will display the model type, description,
interface, and I/O type. In the example shown, the module is a SeaConnect 370 module with a Wireless
(Modbus TCP) interface.
The “Set Settings” and “Change Slave ID” buttons are unsupported for the
SeaConnect 370 and are therefore disabled.
Figure 33: MaxSSD window showing Module Configuration and I/O Tabs
After a successful Get operation, additional tabs will be displayed in MaxSSD, depending on the found
device model. These tabs display device I/O and allow easy configuration for all SeaMAX supported
devices.
The “Broadcast to Multiple Modules” checkbox is not supported for the SeaConnect 370 and is therefore
disabled.
Digital I/O Tab
The “Digital IO” tab is displayed when using Sealevel I/O devices featuring discrete inputs or outputs. It
displays the device’s current input and/or output status in an intuitive and usable manner.
When banks of inputs are displayed, the status LEDs update on each of the banks automatically. This
allows you to actively monitor external signals.