SeaLevel SeaConnect 370, Руководство пользователя

Страница: 21 / 53

21
© Sealevel Systems, Inc. SeaConnect 370 Manual | SL9269 11/2022
Figure 9: Network page showing alert
Restart the SeaConnect 370 by one of three methods:
• Unplug power to the device, wait 5 seconds, and plug it in again.
•
Momentarily press the red configuration button on the device, located near the power input
connector.
•
Visit the Device page and click the “Restart Device” button.
The Status LED will blink once to indicate it is in Infrastructure Mode. After a pause, the Status LED will
then begin to blink rapidly while it waits to connect to a Wi-Fi network. If the SeaConnect 370 has
connected to SeaCloud, the Status LED will turn on and remain on.
SeaConnect 370 Web Interface
This section describes the various web pages that make up the SeaConnect 370 web interface. The
SeaConnect 370 defaults to the I/O page on login to the device. This page allows you review the current
state of the device’
I/O
The I/O page displays status for the all device I/O. There are sections for Inputs, Outputs, and Form C
Relay Extended Behaviors.