©Sealevel Systems, Inc.
SL9222 07/2011
Relio R5200 Manual
9
3.
Remove the top cover (heat sink) from the chassis by lifting straight up. Thermal
conductive pads between internal heat sinks and the cover will make removal seem
difficult. Do not twist or slide the cover while attempting to remove.
4.
With the cover removed, the two DIMM slots are located along one side. Locate the
empty memory socket.
5.
Align the memory module with the socket. The socket is keyed so that memory can only
be installed one way.
6.
Insert the memory module into the socket and push down firmly until seated. The
socket latches will clip into the edge of the DIMM module when seated correctly.
7.
Replace the top cover and tighten the eight (8) screws.
8.
Plug the system into the power source and power up the system.
