SeaLevel Relio R2, Руководство пользователя

Страница: 25 / 37

©Sealevel Systems, Inc. R2 Manual 25
SL9247 2/2017
This is a notification that if you are upgrading from a previous driver version, you should remove
the associated Device Manager hardware entries and reinstall the adapter after the installing the
SeaCOM software.
6. The setup file will automatically detect the operating environment and install the proper
components. Next follow the information presented on the screens that follow. Once the
installation is complete, close the disk installation window.
7. Refer to the Physical Installation section to connect and install your adapter.
UPGRADING TO THE CURRENT SEACOM DRIVER
1. Download the current driver using the Instructions from the Where to Get Software section
above. Please take note of the destination directory it will save to.
2. Uninstall the currently loaded driver SeaCOM driver found in the Control Panel. In Windows 7
and later Oss, it will be found in the Programs and Features list.
3. Navigate to the Device Manager and remove the Sealevel adapter by right clicking on the line
item choosing Uninstall . Depending on your product, it can be found under either Multiport
Serial Adapters or Universal Serial Bus Controllers .
4. In the Device Manager under Action , choose Scan for Hardware Changes . This will prompt the
installation of the adapter and associate it with the newly installed SeaCOM driver.
LINUX SUPPORT
The 12000 Serial Ports are supported natively in Linux kernels 2.6.28 and later.