Installation
Sealevel Systems
ISO-16
Page
4
Installation
The
ISO-16
can be installed in any ISA PC expansion slot. The
ISO-16
contains
a DIP-switch (SW1) and IRQ selection which must be set prior to installation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the
ISO-16
into the slot. Make sure the adapter is seated
properly.
5. Replace the cover.
6. Connect the power cord.
Installation is complete.
Software Installation
For Windows Users
Choose
Install Software
at the beginning of the CD and select the
Digital I/O
software drivers and install
SeaIO
.