Appendix A - Troubleshooting
Sealevel Systems
ISO-16
Page
12
Appendix A - Troubleshooting
1. Identify all I/O adapters currently installed in your system. This includes
your on-board serial ports, controller cards, sound cards etc.
2. Configure your Sealevel Systems adapter so that there is no conflict with
currently installed adapters. No two adapters can occupy the same I/O
address.
3. Make sure the Sealevel Systems adapter is securely installed in a
motherboard slot.
4. The following are known I/O conflicts:
•
The 278 and 378 settings may conflict with your printer I/O
adapter.
•
3B0 cannot be used if a Monochrome adapter is installed.
•
3F8-3FF is typically reserved for COM1:
•
2F8-2FF is typically reserve d for COM2:
•
3E8-3EF is typically reserved for COM3:
•
2E8-2EF is typically reserved for COM4:
