SeaLevel HazPAC R9-8.4 ARM9 Скачать руководство пользователя

Страница: 50 / 53

©Sealevel Systems, Inc.

HazPAC R9-8.4 Manual

SL9257 8/2015

Appendix B – Application Debugging over Ethernet

Applications can be debugged over an Ethernet connection in place of USB by configuring Visual Studio to
directly connect to your device. For this method to work properly, the Ethernet connection to the device

must be properly configured to allow normal TCP/IP communications and you must know the IP address of

the device you wish to execute the application on. For further information about configuring the Ethernet

of the device see the Network Configuration section.

To configure Visual Studio to use your device for debugging over Ethernet, click the “Device Options”

button on the Device toolbar. See below.

On the “Device Options” dialog, select the “Windows CE” platform and click the “Properties…” button. See

below.

On the “Windows CE Device” properties dialog click the “Configure…” button. See below.

Содержание HazPAC R9-8.4 ARM9






















































Результаты поиска

Содержание HazPAC R9-8.4 ARM9

Отзывы:

Похожие инструкции для HazPAC R9-8.4 ARM9

Бренды по названию

Популярные бренды

SeaLevel HazPAC R9-8.4 ARM9, Руководство пользователя

Результаты поиска

Содержание HazPAC R9-8.4 ARM9

Отзывы:

Похожие инструкции для HazPAC R9-8.4 ARM9

Бренды по названию

Популярные бренды