SeaLevel HazPAC R9-8.4 ARM9 Скачать руководство пользователя

Страница: 42 / 53

©Sealevel Systems, Inc.

HazPAC R9-8.4 Manual

SL9257 8/2015

In Microsoft Windows 7, the device is recognized as a GPS camera and will typically enumerate as a COM

port. Verify the numeric assignment of the COM port in the device manager to determine the COM#

associated with the device. If prompted with the Found New Hardware Wizard, install the driver using the

following steps (Microsoft Windows XP dialog boxes are shown, other Microsoft Windows operating systems

are similar). If your operating system prompts you to search Windows Update, choose “No, not this time”.

Then, in the Found New Hardware Wizard, choose "Install from a list or specific location" and click Next.

(See Figure 31.)

Figure 31.

Found New Hardware Wizard

Select "Search for the best driver in these locations" and check "Include this location in the search". Use the

Browse button to navigate to the “Utilities\SAM-BA\XP driver” directory of the R9 Development installation

and click “Next”.

The driver should be installed, and will come in as "AT91 USB to Serial Converter." Click Finish to complete.
(See Figure 32.)

Содержание HazPAC R9-8.4 ARM9






















































Результаты поиска

Содержание HazPAC R9-8.4 ARM9

Отзывы:

Похожие инструкции для HazPAC R9-8.4 ARM9

Бренды по названию

Популярные бренды

SeaLevel HazPAC R9-8.4 ARM9, Руководство пользователя

Результаты поиска

Содержание HazPAC R9-8.4 ARM9

Отзывы:

Похожие инструкции для HazPAC R9-8.4 ARM9

Бренды по названию

Популярные бренды