12
© Sealevel Systems, Inc. 3603 Manual | SL9111 7/2021
BaseIO
Base I/O address in Hexadecimal. Valid ranges are from 0
–
3FF Hex.
Some ranges may be reserved by the PCMCIA system software or
occupied by other peripherals in the host computer system.
IRQ
Interrupt Request Signal in Decimal. Valid ranges are from 2-15. Please
note that some IRQs be reserved by the PCMCIA system software or
occupied by other peripherals in the host computer system.
Type
Device Type. Valid option is UART for the 3603
Interface
Electrical Interface Utilized. Valid options are RS-232, RS-422, RS-485. ( In
the scope of the driver, RS-422 and RS-485 are viewed as the same
value.)
A semicolon (;) at the beginning of a line denotes a comment and the remainder of that line is ignored.
Note the above syntax is an example for one card. Multiple cards (up to eight) may be configured using
the following syntax:
;First Card
[card]
BaseIO=238
IRQ=10
Type = UART
Interface=RS-232
To enable pulse mode interrupts, add the following line to the setup file:
IRQMode = Pulse
Remember this feature will only work on a platform that supports pulse mode interrupts, and if the Card
and Socket services support pulse mode interrupts.
