Service & Support
20
TECHNICAL SERVICE
For technical assistance, please contact your Seal
Graphics technical service representative at:
(410) 379-5688 or (888) 490-4232.
When calling for technical service, please have the
laminator serial number available. The serial number
is located on the identification label, which is just
below the rear control panel.
WARNING: If your laminator does not operate
correctly, contact technical service
immediately.
SERVICE AND REPLACEMENT PARTS
Service and maintenance must be performed fully in
accordance with the instructions. Servicing by any
unauthorized technician voids the warranty. Service
technician must use replacement parts as specified by
Seal Graphics.
NOTE: Service technicians must perform safety
checks after completing any service or
repairs to the laminator.
Figure 21: Electrical Wiring Diagram
