1
Model STV1 Universal Remote Control
Owner’s Manual and Programming Guide
Introduction
Seal Shield is a market leader for infection control products, providing
healthcare technologies for hospitals and your home. We are very
pleased to welcome you to our family of remote control products.
The Seal Shield
TM
Model STV1 Universal Remote employs a
waterproofing process to deliver a programmable universal
remote that is spill proof, fully submersible and dishwasher safe.
Our unique Silver Seal
TM
protection is built into the product to
inhibit the growth of bacteria that may affect this product. Please follow
the instruction detailed in this manual to properly use, program and
enjoy this unique quality product.
Battery Installation
To install batteries in the STV1, remove the battery cover located on the
back of the remote. You will need a Phillips-Head screwdriver to
accomplish this task. When the screws are removed, please note the
small gasket attached to each screw. Ensure these gaskets are on the
screws when you reattach the battery cover.
After removing the screws, lift off the cover. Under the cover you will
find a rectangular gasket. Please set this to the side. Insert two AAA
batteries as indicated on the inside of the remote.
Place the rectangular gasket that you had set aside back in around the
edge of the opening of the battery compartment. Place the cover over
the compartment. Insert each of the screws with their individual
gaskets attached, and tighten firmly into place. As you tighten the
screws, press firmly on the battery cover near where the screw is being
tightened to help secure the gasket in place. Do this for each screw.
Ensure the screws are seated fully, but do not over tighten to avoid
stripping the threads or breaking the screw.
Your remote is now ready for programming and for washing.
