Seakeeper 5 GYRO, Руководство по эксплуатации

Страница: 22 / 39

OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 5 GYRO 90246 4 10 of 13
Section 2: SYSTEM OPERATION
2.4 Normal Shut-Down
1) Verify that no alarms are on the Gyro display. The gyro should be stopped when pulling into
port and stabilization is no longer required. This maximizes long term life as it allows the gyro to
start the coast down cycle before cooling is shutoff. Once the vessel is secured in the slip and
the crew has shut down the generator and engines, the AC and DC breakers that control the
gyro should be switched to the OFF position. The gyro will continue to spool down to zero rpm.
No cooling is required during this time.
2) Press LOCK/UNLOCK button. The LOCK symbol will turn RED
3) Press GYRO ON/OFF button. The ON/OFF symbol will turn RED
4)
When the GYRO is turned off the flywheel is still spinning. When the flywheel has come to a
complete stop 0 RPM will appear on the screen indicating that the flywheel has stopped. It can
take up to 2+ hours for the flywheel to stop spinning.
5) The boat’s AC and DC circuit breakers that supply power to the gyro and sea water pump can be
turned off.