Seakeeper 5 GYRO, Руководство по эксплуатации

Страница: 19 / 39

OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 5 GYRO 90246 4 7 of 13
Section 2: SYSTEM OPERATION
a. The RETURN button will return the DISPLAY to the SERVICE screen
2.2 Start-up
1) Make sure AC and DC power are available.
2) Turn on the boat’s DC circuit breaker that supplies power to the Gyro.
3) Turn on the boat’s AC circuit breaker that supplies power to the Motor Drive Box.
4) In most cases, the seawater pump will be wired to turn on when the Gyro or Motor Drive Box is
turned on. However, in some cases the seawater pump is on a separate AC or DC circuit breaker
and it is necessary to turn it on.
5) When the DC power is turned on the DISPLAY will initialize and the HOME screen will appear. If
a FAULT is present an ALARM screen will appear.
To turn the GYRO ON depress the POWER ON/OFF FAULT RESET button, the button will turn
GREEN, the flywheel will spin (or arrow appear), and a RED PROGRESS BAR will appear. The
PROGRESS BAR indicates how soon the gyro will be available for stabilization. When the Gyro is
initialized and when the GYRO is up to minimum operating speed the PROGRESS BAR will turn
from RED to GREEN. At this point, the GYRO is available for stabilization.