Seahorse EX-2 Pro, Руководство пользователя

Страница: 6 / 39

The Battery
Seahorse uses a high-performance 5000mAh (or 5AH) Lithium Polymer (LiPo) 6S, 25.2v battery.
•
The Battery is made up of six separate cells linked in series to give 25.2 volts of power.
•
The battery has the power lead with its yellow XT90 connector.
• The battery has a separate set of seven wires known as the balance cable. The balance
cable connects to each cell in the battery and is used to ensure the cells are charged
correctly and the voltage of the cells are balanced.
•
A fully charged battery is 25.2v
•
Storage mode will adjust the battery voltage to 23v.
• A discharged or flat battery is 21v.
• Never discharge below 20v or 3.3v per cell. This will damage the battery.
If you are not using the battery for a week or more, store the battery in storage mode.
Do not use the battery
• if there is any visible damage to any of the cells,
• if the battery is swollen or puffy.
• The power leads or connector is damage.
•
If the battery is not holding its charge.
•
Large variance (>0.1v) in the voltage of the cells.
These are all signs of a faulty or failing battery and failure in flight could result in a crash.
The battery charger can operate from a DC or battery power supply. This means you could use an
SLA (Lead Acid) battery to charge the LiPo batteries at the beach. The charge time will be up to one
hour. One 14ah SLA battery would be able to charge one 6S 5000mAh LiPo battery.
Different battery types have different characteristics and this can affect how you use and treat the
battery.
Page 6