Seahorse EX-2 Pro, Руководство пользователя

Страница: 11 / 39

Flight Modes and Functions
Led Warning Lights
It is important to understand the various warning lights for the safe operation of your craft –
ensure you fully understand each one.
• Flashing green – ready to arm. Will show 3D in the top right of Skydroid Tower app.
• Faster flashing green – Ready to Arm and it is in SBAS mode with better positioning data.
Will show 3D & DGPS in the top right of Skydroid Tower app.
•
Solid Green – The drone is armed ready to start and launch. Press throttle forward to lift
off.
• Flashing orange - There are insufficient Satellite connections (no 3D fix) to launch, or the
RTL activated or LOW battery RTL.
• Flashing orange before launch – The Drone battery voltage is too low. Check battery level
on phone is above the low voltage failsafe. Replace the battery with a fully charged battery.
•
Flashing Blue – lost GPS satellites – If the drone is in the air, switch to ALT hold mode to
regain control.
• Radio beeping – The Transmitter is not connecting with the drone. The most likely cause is
no power on the drone. Connect a battery and plug in the Quick Switch.
Mode Switch ‘E’
• The top LEFT SWITCH on the remote controller “E” is the flying mode switch.
• Switch Full right = Loiter mode (GPS mode)This is the recommended flying mode to use.
• Switch Middle = ALT (Altitude) Hold is a stable self-levelling mode without GPS assistance.
The drone will maintain an altitude, but it will drift with the wind. All users should learn to
fly in this mode in the event of satellite loss.
• Switch Full left = POS (Position) HOLD (GPS mode) – This is similar to the Loiter mode, but it
has a slower or softer
braking action for a
reduced pendulum
effect.
• Make sure that you
have good space
around you when using
POS MODE as the
drone will take longer
to stop and hold its
position.
Page 11