Seagull Models SEA207, Инструкция по сборке

Страница: 30 / 39

P47 SNAFU Instruction Manual.
30
Elevator control horn.
Rudder control horn.
Hex nut.
Fuel tubing.
M2 clevis.
Elevator pushrod.
Rudder pushrod.
RUDDER PUSHROD INSTALLATION.
1) Locate items necessaryto install rud-
der pushrod.
Elevator control horn.
50mm.
2) Install the elevator control horn using
the same method as with the aileron con-
trol horns.
3) Position the elevator control horn on
the both side of elevator.
3) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the
horns on until they are flush with the ends
of the control rods.
4) Elevator and rudder pushrods assem-
bly as pictures below.
M2 lock nut.
M2 clevis.
515 mm
Cut.