SEA FURY.
Instruction Manual.
25
!
1) Elevator and rudder pushrods assembly
follow pictures below.
!
2) Connect the elevator and rudder servos
to your radio’s receiver and turn on the sys-
tem. Set the trim tabs on the transmitter to
neutral and center the servo arms. The eleva-
tor and rudder servo arms should be perpen-
dicular to the servos.
!
3) One at a time, hold the pushrods in po-
sition over the respective servos to check for
proper servo direction. If any servo turns in
the wrong direction, switch your radio’s re-
versing switches as necessary to achieve the
correct direction.
ELEVATOR - RUDDER PUSHROD INSTALLATION.
Elevator
control horn.
Elevator
control horn.
Rudder
control horn.
Control horn.
Pushrod.
M2 lock nut.
Elevator
control horn.
Rudder
control horn.
!
4) Install servos arm to servos. Notice the
position of the servo arms on the servos. See
picture below.
Adjustable Servo
connector.
Servo arm.
Elevator.
Switch.
Rudder.
Elevator. Throttle.
