19
www.seagullmodels.com
M3 x 12mm.
1
Elevator pushrod.
490mm.
Cut.
4) Elevator and rudder pushrods assembly
as pictures below.
3) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the horns
on until they are flush with the ends of the con-
trol rods.
ELEVATOR PUSHROD HORN
INSTALLATION.
Elevator fiberglass
control horn.
Rudder fiberglass
control horn.
Elevator fiberglass
control horn.
1) Install the elevator fiberglass control
horn using the same method as with the
aileron fiberglass control horns.
2) Position the elevator fiberglass control
horn on the both side of elevator.
M2 lock nut.
Metal clevis.
Elevator pushrod.
M3 x 12mm.
