RENO AIR CARE YAK-11 “PERESTROIKA”
Instruction Manual.
6
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
4) Use dental floss to secure the connec-
tion so they cannot become unplugged.
C/A glue
INSTALLING THE ALLERON SERVOS
Flap control horn
5
.
6
.
3
.
1
.
2
.
2) Use drill bit in a pin vise to drill the
mouting holes in the blocks.
3) Apply 2-3 drops of thin C/A to each
of the mounting holes. Allow the C/A to
cure without using accelerator.
1.5mm
3
.
4
.
Ask the customer to use this machine.
Torque
: 80 oz-in (5.8 kg-cm) @ 4.8V;
100 oz-in (7.2 kg-cm) @ 6.0V
