Seagate STT20000A Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 88

background image

Important Information About This Manual

All information contained in or disclosed by this document is considered proprietary by Seagate Technology. By
accepting this material, the recipient agrees that this material and the information contained therein are held in
confidence and in trust and will not be used, reproduced in whole or in part, nor its contents revealed to others,
except to meet the purpose for which it was delivered. It is understood that no right is conveyed to reproduce or
translate any item herein disclosed without express written permission from Seagate Technology.

Seagate Technology provides this manual "as is," without warranty of any kind, either expressed or implied,
including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Seagate
Technology reserves the right to change, without notification, the specifications contained in this manual.

Seagate Technology assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of this
manual, nor for any problem that might arise from the use of the information in this manual.

«
...
2
3
4
5
6
...
»

Содержание STT20000A

























































































Отзывы:

Нет отзывов

Похожие инструкции для STT20000A

Бренд: Palram Страницы: 74

AccuRAID AR316X12

Бренд: Sans Digital Страницы: 8

Бренд: Sans Digital Страницы: 2

Бренд: Accordance Systems Страницы: 22

Бренд: LaCie Страницы: 22

ReadyNAS 3220 Series

Бренд: NETGEAR Страницы: 4

TOWER STORAGE TS421S

Бренд: SilverStone Страницы: 52

HD-HCU2 DriveStation

Бренд: Buffalo Страницы: 8

Бренд: Performance Tool Страницы: 2

Бренд: Panasonic Страницы: 18

Бренд: Bosch Страницы: 20

PowerVault 110T SDLT320

Бренд: Dell Страницы: 43

PowerVault 120T

Бренд: Dell Страницы: 53

Dell PowerVault MD32X0

Бренд: Dell Страницы: 33

Portable Backup Hard Drive

Бренд: Dell Страницы: 13

Бренд: Dell Страницы: 72

Express Flash NVMe PCIe SSD AIC

Бренд: Dell Страницы: 15

Бренд: Dell Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды