Seagate STT20000A Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 88

background image

Introduction

Chapter 1

STT20000A Product Manual

Page 5

Instead, the write-read heads are logically or mechanically switched to a different
position on the tape and another track is written or read in the reverse direction.
That is, the drive first records track 1 in one direction and when the end of the tape
is reached, the head is moved and the direction of tape motion is reversed to record
track 2. This serpentine process continues until the entire tape is recorded. The
individual tracks are sequential to minimize the amount of head motion as the heads
change position for each track.

Flash EEPROM

The STT20000A incorporates leading-edge technology in the flash EEPROM, which
is useful should the drive's firmware need to be upgraded at some point. With the
permanently installed, electrically upgradeable, flash EEPROM memory, revised
firmware for the drive can be loaded via any one of two methods:

•

Seagate OEM firmware cartridge (See chapter 4)

•

Host IDE bus

This feature enables qualified OEMs needing to revise the drive firmware to do so
rapidly and at a reduced cost. Flash EEPROM should also prolong the life cycle of a
drive because many new techniques—such as increasing the capacity of the drive
through support for longer tapes—may require only a firmware upgrade.

Software

The STT20000A is a cost-effective means of backing up fixed disks. The drive is
compatible with DOS

TM

version 5.0 or later, Microsoft Windows

TM

3.1 or later,

Microsoft Windows 95, or Windows NT and will operate with many of the popular
backup software applications such as Seagate 's Backup for DOS and Windows,
Windows 95, NetWare, or Windows NT.

References

The following standards documents describe some of the technology incorporated in
the drives referenced in this manual.

•

QIC-170—Preformatted magnetic minicartridge

•

QIC-157—ATAPI command set for streaming tape

•

QIC-3095-MC—Serial recorded magnetic tape minicartridge (TR-4)

•

QIC-3220-MC—Serial recorded magnetic tape minicartridge (TR-5)

For more information about a particular QIC standard, contact Quarter-Inch
Cartridge Standards, Inc., c/o Freeman Associates, 311 East Carrillo Street, Santa
Barbara, California 93101.

«
...
11
12
13
14
15
...
»

Содержание STT20000A

























































































Отзывы:

Нет отзывов

Похожие инструкции для STT20000A

Бренд: Oki Страницы: 16

Бренд: Omlet Страницы: 4

Azure StorSimple 8100

Бренд: Microsoft Страницы: 12

Бренд: Stardom Страницы: 2

Бренд: US Robotics Страницы: 156

Бренд: Chieftec Страницы: 18

Бренд: Gateway Страницы: 64

NetShare GX ME-752GNS

Бренд: welland Страницы: 3

Бренд: Husky Страницы: 7

Бренд: Bull Страницы: 50

Expansion 750GB

Бренд: Seagate Страницы: 1

Бренд: Husky Страницы: 10

TVS- 72XU Series

Бренд: QNAP Страницы: 56

Citrix XenServer

Бренд: Fujitsu Страницы: 23

Бренд: Fujitsu Страницы: 12

Бренд: Fujitsu Страницы: 14

Бренд: Fujitsu Страницы: 50

Бренд: Fujitsu Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды