Seagate Laptop SSHD SATA Product Manual, Rev. M
20
Configuring and Mounting
n
Avoid excessive drive distortion when mounting. Refer to the following specifications for stiffness/deflection information:
Figure 3
Mounting Dimensions (for standard models)
Top cover stiffness/deflection
Operating: no performance degradation, emitted
noise, mechanical damage, or hard errors
10 mm probe: 1.02kgf or
5 mm probe: 0.92kgf
Non-operating: no hard errors
20 mm probe: 2.0kgf at any point of top cover
20 mm probe: 15.0kgf at top cover edges only
BREATHER HOLE,
DO NOT COVER OR SEAL
RECOMMENDED CASE TEMP
MEASUREMENT LOCATION
ON THE END OF THE DRIVE
0.263 in
6.669 mm
0.230 in
5.850 mm
+.008
-.010
+0.20
-.025
3.951 in
100.35 mm
0.835 ± .010 in
21.21 ± 0.25 mm
2.750 ± .010 in
69.85 ± 0.25 mm
0.370 ± .008 in
9.50 ± 0.20 mm
0.551 in
13.995 mm
0.551 in
13.995 mm
3.567 in
90.602 mm
3.567 in
90.602 mm
0.324 ± .010 in
8.230 ± 0.25 mm
0.334 ± .050 in
8.484 ± 1.27 mm
2.430 in
61.722 mm
0.160 in
4.064 mm
