Seagate ST600MP0074 Скачать руководство пользователя | Manualshive

Страница: 12 / 86

background image

4

Savvio 15K SAS Product Manual, Rev. B

2.1.2

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking
and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-
tem represents the most popular characteristics for test platforms. The system configurations include:

• Typical current use microprocessor
• 3.5-inch floppy disc drive
• Keyboard
• Monitor/display
• Printer
• External modem
• Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee
that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance
and provide the appropriate marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and
Directive 93/68/EEC of 22 July 1993.

Australian C-Tick

If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZS3548 1995
and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Man-
agement Agency (SMA).

Korean MIC

If this model has the Korean Ministry of Information and Communication (MIC) logo, it complies with paragraph
1 of Article 11 of the Electromagnetic Compatibility (EMC) Control Regulation and meets the Electromagnetic
Compatibility Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.

Taiwanese BSMI

If this model has two Chinese words meaning “EMC certification” followed by an eight digit identification num-
ber, as a Marking, it complies with Chinese National Standard (CNS) 13438 and meets the Electromagnetic
Compatibility (EMC) Framework requirements of the Taiwanese Bureau of Standards, Metrology, and Inspec-
tion (BSMI).

«
...
10
11
12
13
14
...
»

Содержание ST600MP0074























































































Отзывы:

Нет отзывов

Похожие инструкции для ST600MP0074

Бренд: RAID Страницы: 108

Бренд: Husky Страницы: 20

MARK V Model 520

Бренд: Shopsmith Страницы: 32

Бренд: Lifetime Страницы: 52

Бренд: G&T SALES Страницы: 2

Бренд: Quantum Страницы: 20

STORAGE CAB4000 -

Бренд: Tandberg Data Страницы: 13

Бренд: INTILION Страницы: 121

Бренд: QNAP Страницы: 68

Бренд: Quantum Страницы: 344

Бренд: Performance Tool Страницы: 2

Бренд: Western Digital Страницы: 2

DataStation pocket q.ue

Бренд: TrekStor Страницы: 112

5BIG THUNDERBOLT 2

Бренд: LaCie Страницы: 20

SDSDQ-512-A10M - 512MB TransFlash microSD Card Retail...

Бренд: SanDisk Страницы: 1

Бренд: DFI Страницы: 28

Бренд: Gardener's Страницы: 2

Бренд: Ryobi Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды