Configuring the computer
Configure your computer for the drive as follows:
1. Turn the computer on and follow the manufacturer’s instructi-
ions for running the CMOS Setup routine.
2. When CMOS Setup starts, first select a drive type that
matches your drive’s translation geometry:
If none of the standard drive types offered by the Setup routine
match the translation geometry shown in the following table,
select the
user-defined or custom drive type to enter your
drive’s translation geometry.
Model
Translation geometry
CMOS
Mbytes
Mbytes
(F)
1
Cyl
Heads
Sectors
per
track
ST5660A
543.76
2
1,057
3
16
63
518.73
527.65
2
1,024
3
16
63
503.47
1. Mbytes reported by CHKDSK after a DOS format.
2. This capacity is supported by systems that allow more than
528 Mbytes per drive.
3. A jumper must be installed over pins 33 and 34 of jumper
block J8.
ST5660A Installation Guide, Rev. B
9
