Seagate ST31230DC, Руководство по эксплуатации продукта

Страница: 53 / 80

Product Manual - Hawk 2LP Family (Wide) SCSI-2 (Volume 1), Rev. A 45
_____________________________________________________________________________________
11.4 SCSI bus conditions and miscellaneous features supported
SCSI bus conditions supported by the drive are listed in Table 11.4-1. These conditions cause the SCSI device
to perform certain actions and can alter the SCSI Bus phase sequence. Other miscellaneous operating features
supported are also listed here.
Table 11.4-1. SCSI bus conditions and other misc. features
Condition/Feature Supported by:
SCSI-1 SCSI-2/SCSI-3 Conditions or Feature
Y Y Attention Condition
Y Y Reset Condition
Y Y Contingent Allegiance Condition
N N Asynchronous Event Notification
Y Y Arbitrating System
Y Y Disconnect/Reconnect
Y Y Asynchronous Data Transfer
Y Y Synchronous Data Transfer
N N Synchronized (locked) Spindle Operation
Y Y Differential Interface Circuits available
Y Y Segmented Caching
N N Zero Latency Read
Y Y Queue tagging (up to 64 Que tags supported)
Y Y Deferred Error Handling
Y Y Parameter Rounding
Y Y Reporting actual retry count in Extended Sense bytes
15, 16 and 17.
N N Adaptive Caching
N N SMP = 1 in Mode Select command needed to save
RPL and Rotational Offset bytes (in Table 5.2.1-25
of Vol. II).
[1] [1] Flag and Link bits in Control Byte supported
Y Y Immediate status on Start/Stop command
Y Y Immediate status on Format unit command
N N Synchronize cache command
Y Y Format progress indication
SCSI-1 SCSI-2/SCSI-3 Status Supported
Y Y Good
Y Y Check Condition
N N Condition Met/Good
Y Y Busy
[1] [1] Intermediate/Good
N N Intermediate/Condition Met/Good
Y Y Reservation Conflict
Y Y Queue Full
Notes.
[1] Option supported only if customer requests.