Seagate ST12450W, Руководство по эксплуатации продукта

Страница: 57 / 84

ST12450W/WD Product Manual, Rev. A 47
continued from previous page
Command Supported by:
code SCSI-1 SCSI-2 Command name
1Ch Y Y Receive Diagnostic Results
Y Y Supported Diagnostics Pages
Y Y Translate Page
1Dh Y Y Send Diagnostics Page
Y Y Supported Diagnostics Pages
Y Y Translate Page
25h Y Y Read Capacity
28h Y Y Read Extended
2Ah Y Y Write Extended
2Bh Y Y Seek Extended
2Eh Y Y Write and Verify
2Fh Y Y Verify
30h N N Search Data High
31h N N Search Data Equal
32h N N Search Data Low
33h N N Set Limits
34h N N Prefetch
35h N N Synchronize Cache
36h N N Lock-Unlock-Cache
37h Y Y Read Defect Data
39h N N Compare
3Ah N N Copy and Verify
3Bh Y Y Write Buffer [2]
3Ch Y Y Read Buffer [2]
3Eh Y Y Read Long
3Fh Y Y Write Long
40h Y Y Change Definition
41h N N Write Same
42-4Bh N N Not used
4Ch N N Log Select
4Dh N N Log Sense
4E-54 N N Not used
55h N Y Mode Select (10)
56h N Y Reserve (10)
57h N Y Release (10)
58-59 N N Not used
5Ah N Y Mode Sense (10)
5B-5F N N Not used
60-BFh N N Not used
C0-DFh N N Not used
EO-FFh N N Not used
[1] Format to any even number of bytes per sector from 180 to 4,096.
[2] If cache is enabled (RCD = 0 in Mode Sense page 08h), byte transfer
length is 976,896 bytes plus a 4-byte header.
If cache is disabled (RCD = 1), byte transfer length is 976,896 bytes plus
a 4-byte header.