Seagate Spinpoint M8, Руководство по эксплуатации продукта

Страница: 61 / 83

Spinpoint M8 Product Manual REV 2.6
55
Word Content Description
2 1= Security locked
1 1= Security enabled
0 1= Security supported
129-159 0000h Vendor specific
160 0000h CFA power mode 1
161-175 0000h Reserved for CFA
176-205 0000h Current media serial number
206-254 0000h Reserved
255 xxxxh Integrity word
15-8 Checksum
5 Signature (A5h)
8.2.8 Idle (E3h)
This command causes the drive to enter the Idle Mode, clear BSY, and generate an interrupt. The interrupt is
generated even though the drive may not have fully transitioned to Idle Mode.
If the drive is already spinning, the spin-up sequence is not executed.
If the Sector Count register is non-zero, then the automatic Idle Mode sequence is enabled, and the timer
begins counting down immediately. If the Sector Count register is zero, the automatic power down sequence
is disabled.
After the drive enters Idle Mode, it automatically transitions to Standby Mode upon expiration of a prescribed
1 minute spin-down timer.
Table 8-6 Automatic Standby Timer Periods
Sector Count Register Contents Corresponding Time-Out Period
0 (00h) Timeout Disabled
1-240 (01h-FOh) (value * 5) seconds
241-251 (F1h-FBh) (value - 240) * 30 minutes
252 (FCh) 21 minutes
253 (FDh) 8 hours
254 (FEh) Reserved
255 (FFh) 21 minutes 15 seconds
8.2.9 Idle Immediate (E1h)
This command causes the drive to enter Idle Mode, clear BSY, and generate an interrupt. The interrupt is
generated even though the drive may not have fully transitioned to Idle Mode.