Seagate SkyHawk AI Product Manual, Rev. B
27
www.seagate.com
Configuring and Mounting the Drive
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
Refer to
Figure 4
for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 inch (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
3.4.1
Mechanical specifications
Refer to Figure 4 for detailed mounting configuration dimensions. See Section 3.4, "Drive mounting."
Figure 4 Mounting dimensions
Weight:
1.55 lb
705 g
Note
These dimensions conform to the Small Form Factor Standard documented in
SFF-8301 and SFF-8323, found at
www.sffcommittee.org
2X 1.750±.010
1.432±.019
2
.128±.010 in
3.23 ± .25 mm
CL OF DRIVE
CL OF CONN
4X 6-32 UNC 2B
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES.
MAX TORQUE 6 IN/LBS
Y
5.787 MAX
146.99 MM
6X 6-32 UNC 2B
3 MIN THREAD DEPTH
.14 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES.
MAX TORQUE 6 IN/LBS
Z
Y
1.028 MAX
26.11 MM
.138±.015 2
CL OF DRIVE
Z
TEMPERATURE
CHECKPOINT 60°C MAX
2X 4.000 ±.010 in
101.60 ±.25 mm
.250 ±.010 in
6.35 ± .25 mm
.814 in
20.68 mm
4.000 ±.010 in
101.60 ±.25 mm
3.750 ± .010 in
95.25 ± .025mm
2.000 in
50.80 mm
2X 1.122 ±.020 in
28.50 ±.51 mm
2X
1
.638±.0
1
0
2X 1.625 ± .020 in
41.28 ± .51 mm
