Seagate Savvio 10K Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 88

background image

40

Savvio 10K.5 SAS Product Manual, Rev. D

7.5.4.1

Shock

a. Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not
exceeding:

• 40 Gs at a maximum duration of 11ms (half sinewave)

• 25 Gs at a maximum duration of 2ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

b. Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes
both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device
damage or performance degradation.

• 80 Gs at a maximum duration of 11ms (half sinewave)

• 400 Gs at a maximum duration of 2ms (half sinewave)

• 300 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis.

c. Packaged

Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM
standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight
costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less
than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper
drive placement.

Figure 14.

Recommended mounting

Note.

Image is for reference only, may not represent actual drive.

«
...
46
47
48
49
50
...
»

Содержание Savvio 10K

























































































Отзывы:

Нет отзывов

Похожие инструкции для Savvio 10K

Бренд: DB GROUP HERRAJES Страницы: 4

Бренд: NEC Страницы: 59

d2 Ethernet Disk mini

Бренд: LaCie Страницы: 23

Бренд: U-Line Страницы: 2

Бренд: Jefferson Страницы: 2

Бренд: morse Страницы: 6

Бренд: Stardom Страницы: 2

Бренд: Keter Страницы: 76

Бренд: Décor et Jardin Страницы: 24

Бренд: Velleman Страницы: 4

Бренд: QPS Страницы: 9

Бренд: Thecus Страницы: 120

Бренд: CASARIA Страницы: 13

MediaStore 7200

Бренд: Harmonic Страницы: 2

Бренд: Dahua Страницы: 246

SDSDQ-512-A10M - 512MB TransFlash microSD Card Retail...

Бренд: SanDisk Страницы: 1

Бренд: morse Страницы: 3

Бренд: 3Ware Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды