Seagate Nytro XP6302 Flash Accelerator Cards User Guide, Rev. E
14
www.seagate.com
Nytro XP6302 Card Characteristics
Figure 6 Nytro XP6302 Card LED Diagram
The following table shows LED Descriptions:
Table 2 Status Indicators on a Running System
Name
Color
LED Description
Life
Green
On, steady – Card has sufficient life remaining for programming and erasing the Flash memory. No
action required.
Yellow
On, steady – Card has approximately 10% or less of life remaining for programming and erasing the Flash
memory. Plan for replacements.
Red
On, steady – Card has no program or erase cycles left. Data can be read, but writes are at risk. Back up data and
copy to a new Nytro XP6302 card.
Status
Green
On, steady – Normal.
On, blinking – Lets the user locate a specific Nytro XP6302 card in a rack of servers.
Yellow
On, steady – Warning. One of the following conditions applies:
Temperature warning. If this condition persists, you might damage your Nytro XP6302 card. Increase cooling
for the card or shut down your system to prevent damage.
Other component issues: Run the list and health commands in the management utility to determine which
component has an issue.
Red
On, blinking – Firmware fault code:
Run the management utility to determine which component has an issue.
If no information appears, reboot the system and retry.
If no information appears, contact
Seagate Technology Support Services
.
On, steady – One of the following conditions applies:
At least one SSD has exceeded its temperature.
Failed RAID volume (DD mode).
No RAID volume is configured (DD mode).
Backup power store failed.
Other component issues: Run the list and health commands in the management utility to determine which
component has an issue.
If no information appears, reboot the system and retry the utility.
