Seagate Lyve Mobile Array Скачать руководство пользователя страница 76

Страница: 76 / 117

where

IP address

is the Rackmount Receiver iSCSI port IP address, for example:

iscsiadm -m discovery -t st -p 192.168.99.100

Example output

192.168.99.100:3260,1 iqn.1995-03.com.dothill:01.array.000000000000-00000000.a

192.168.99.101:3260,2 iqn.1995-03.com.dothill:01.array.000000000000-00000000.a

3. To discover the iSCSI target, enter the following:

iscsiadm -m node -T

IQN

–l

where

IQN

is an iSCSI qualified name, for example:

sudo iscsiadm -m node -T iqn.1995-
03.com.dothill:01.array.000000000000-00000000.a –l

The IQN can be found in the output from the previous discovery command.

Example output

Logging in to [iface: default, target: iqn.1995-03.com.dothill:01.array.000000000000-
00000000.a, portal: 192.168.99.100,3260]

Logging in to [iface: default, target: iqn.1995-03.com.dothill:01.array.000000000000-
00000000.a, portal: 192.168.99.101,3260]

Login to [iface: default, target: iqn.1995-03.com.dothill:01.array.000000000000-
00000000.a, portal: 192.168.99.100,3260] successful.

Login to [iface: default, target: iqn.1995-03.com.dothill:01.array.000000000000-
00000000.a, portal: 192.168.99.101,3260] successful.

4. To complete the mapping of the initiator to the Lyve Mobile Array volume, the Lyve Client app must be

refreshed. On the workstation used to manage Lyve Mobile devices, open the Lyve Client.

5. Click on the Devices tab.

6. In the Data Connections section, click Rescan Network.

Lyve Mobile Rackmount Receiver

7/26/22

Содержание Lyve Mobile Array






















































































































Результаты поиска

Содержание Lyve Mobile Array

Отзывы:

Бренды по названию

Популярные бренды

Seagate Lyve Mobile Array, Руководство пользователя

Результаты поиска

Содержание Lyve Mobile Array

Отзывы:

Бренды по названию

Популярные бренды