Seagate Exos Enterprise ST16000NM0092, Руководство по эксплуатации продукта

Страница: 24 / 50

Seagate Exos 2X18 SATA Product Manual, Rev. A 23
www.seagate.com Configuring and mounting the drive
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See
Figure 4 for drive mounting dimensions. Follow these important mounting precautions
when mounting the drive:

Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.

Use only 6-32 UNC mounting screws.

The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.

Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1 Mechanical specifications
Refer to
Figure 4
for detailed mounting configuration dimensions. See Section 3.4 , “Drive mounting.”
NOTE These dimensions conform to the Small Form Factor Standard documented in SFF-8301
and SFF-8323, found at
www.snia.org/technology-communities/sff/specifications
Figure 4. Mounting configuration dimensions
NOTE The image is for mechanical dimension reference only and may not represent the actual drive.
Weight: 18TB & 16TB 1.466 lb 665 g
L
L
MAX TORQUE 6 IN/LBS
B
MAX TORQUE 6 IN/LBS
L