b. (Optional) Insert a cage nut in the front rack post just below it in the allocated 4U space, then make sure the nut spring
is fully engaged in the post hole. Reserve this cage nut for use during non-operating transport of the storage enclosure.
Figure 12 Location for cage nut near top of allocated 4U space
5. Repeat the entire procedure for the left outer rail assembly and the perform a fit check to validate each rail's correct length
and location within the rack cabinet.
Attach the inner rails to the storage enclosure
You must correctly attach the inner rails to the storage enclosure to bear the weight of its contents.
Required equipment
Qty
Identification
Inner rails, properly oriented
2
N/A
T10 Torx screwdriver, 6-in length
1
N/A
M3 low profile screws, 5x2.75-in length
10
#2 Phillips-head screwdriver, 6-in length
1
N/A
Panhead screw, M4x4mm length
2
CMA A bracket
1
10
