Seagate Cheetah NS 10K Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 90

background image

4

Cheetah NS FC Product Manual, Rev. A

2.2

Compliance

2.2.1

Electromagnetic compliance

Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking
and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys-
tem represents the most popular characteristics for test platforms. The system configurations include:

• Typical current use microprocessor

• 3.5-inch floppy disc drive

• Keyboard

• Monitor/display

• Printer

• External modem

• Mouse

Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee
that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance
and provide the appropriate marking for their product.

Electromagnetic compliance for the European Union

If this model has the CE Marking it complies with the European Union requirements of the Electromagnetic
Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and
Directive 93/68/EEC of 22 July 1993.

Australian C-Tick

If this model has the C-Tick Marking it complies with the Australia/New Zealand Standard AS/NZS3548 1995
and meets the Electromagnetic Compatibility (EMC) Framework requirements of Australia’s Spectrum Man-
agement Agency (SMA).

Korean MIC

If this model has the Korean Ministry of Information and Communication (MIC) logo, it complies with paragraph
1 of Article 11 of the Electromagnetic Compatibility (EMC) Control Regulation and meets the Electromagnetic
Compatibility Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.

This drive has been tested and complies with the Electromagnetic Interference/Electromagnetic Susceptibiliity
(EMI/EMS) for Class B products.

Taiwanese BSMI

If this model has the Chinese National Standard (CNS) 13438 marking, it complies with Chinese National Stan-
dard (CNS) 13438 and meets the Electromagnetic Compatibility (EMC) Framework requirements of the Tai-
wanese Bureau of Standards, Metrology, and Inspection (BSMI).

«
...
12
13
14
15
16
...
»

Содержание Cheetah NS 10K



























































































Отзывы:

Нет отзывов

Похожие инструкции для Cheetah NS 10K

Бренд: Vaillant Страницы: 176

MOBILERAID MR5S1

Бренд: Sans Digital Страницы: 1

StorTrends 1312-P

Бренд: American Megatrends Страницы: 2

LIBRARIES D2175

Бренд: Plasmon Страницы: 90

301300U - Ethernet Disk NAS Server

Бренд: LaCie Страницы: 62

Бренд: Sako Страницы: 19

Бренд: extraspace Страницы: 16

Бренд: Icy Box Страницы: 24

Brilliant by Design Deck Box DB7000

Бренд: Suncast Страницы: 12

Barracuda 36ES2 ST318418N

Бренд: Seagate Страницы: 2

Бренд: Icy Box Страницы: 17

Бренд: adapt Страницы: 3

Бренд: Hitachi Страницы: 22

Бренд: Hitachi Страницы: 27

Unified Storage VM

Бренд: Hitachi Страницы: 70

Ultrastar C10K900

Бренд: Hitachi Страницы: 2

VSP 5000 Series

Бренд: Hitachi Страницы: 92

Бренд: Hitachi Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды