Seagate Barracuda ST11950N Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 94

background image

8

Barracuda 1 and 2 Product Manual, Rev. C

4.2

Unformatted and formatted capacities

Standard OEM models are formatted to have 512-byte sectors.

The ST11950 drive has six (6) spare sectors per cylinder and one (1) spare
cylinder per unit.

The ST12550 drive has nine (9) spare sectors per cylinder and one (1) spare
cylinder per unit.

Formatted

Unformatted

ST11950N/ND

1,690 Mbytes

2,030 Mbytes

ST11950W/WD

1,690 Mbytes

2,030 Mbytes

ST12550N/ND

2,139 Mbytes

2,572 Mbytes

ST12550W/WD

2,139 Mbytes

2,572 Mbytes

Users having the necessary equipment may modify the data block size
before issuing a format command to obtain different formatted capacities.
User-available capacity also depends on the spare reallocation scheme
selected. See the Mode Select command and the Format command in the
SCSI-2 Interface Product Manual (part number 77738479).

4.3

Options

The capacities shown in Section 4.2 are normally provided. Other capaci-
ties can be ordered depending on the sparing scheme and sector size
requested.

The following options are incorporated at the time of production or are
available separately.

• Front panel (green lens), part number 70869751

The standard front panel is black plastic. You may order other colors. Each
panel has a single rectangular green LED indicator lens that, when
glowing, indicates the drive is selected.

•

Barracuda Disc Drive Installation Guide, part number 83327770
This manual provides basic installation information for persons not
familiar with the product. It also includes information on obtaining techni-
cal support and service for the drive.

• Drive termination for single-ended drives

Removable resistor modules (SIPs) provide ST11950N and ST12550N
drive termination. Permanently mounted active terminator ICs provide
ST11950W and ST12550W drive termination; however, the ICs may be
disabled by removing the Enable Drive Terminator jumper from J4 pins 11
and 12. See Section 11.7.3.3.

• Single-unit shipping pack kit

The drive is shipped in bulk packaging to provide maximum protection
against transit damage. Units shipped individually require additional
protection as provided by the single-unit shipping pack.

• Adapter accessory frame kit, part number 75790701

This kit contains a frame, which allows a 3.5-inch drive to be mounted
in a 5.25-inch drive bay. It includes mounting hardware, front panel with
a green lens, an LED with cable that connects to the remote LED
connector, and installation instructions.

«
...
16
17
18
19
20
...
»

Содержание Barracuda ST11950N































































































Отзывы:

Нет отзывов

Похожие инструкции для Barracuda ST11950N

Dock & Done S-DVD-100

Бренд: Olympus Страницы: 156

Бренд: Global Industrial Страницы: 7

Бренд: SIP Страницы: 6

Бренд: OCZ Страницы: 3

Biometric Hard Drive

Бренд: LaCie Страницы: 44

Бренд: Campbell Страницы: 30

BARRACUDA 7200.10 ST3160215AS

Бренд: Seagate Страницы: 2

Бренд: E-Z-RECT Страницы: 2

Бренд: myToys Страницы: 4

Бренд: Tuff Nano Страницы: 17

Бренд: 3Ware Страницы: 50

Бренд: Seagate Страницы: 86

Little Big Disk Quadra

Бренд: LaCie Страницы: 32

Бренд: Dunster House Страницы: 15

Бренд: Safco Страницы: 2

Бренд: ramia Страницы: 3

Бренд: ramia Страницы: 7

Бренд: Franklin Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды