20
Barracuda ATA II 100 Family Product Manual, Rev. A
•
The screws should be inserted no more than 0.200 inch (5.08 mm) into
the bottom mounting holes and no more than 0.14 inch (3.55 mm) into
the side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
•
Do not use a drive interface cable that is more than 18 inches long.
Figure 3. Mounting dimensions—top, side and end view
Both Sides
[5.787]
147.00 Max
[1.098 ±
0.011]
27.90 ± 0.27
[1.638 ± 0.013]
41.60 ± 0.33
[4.000 ± 0.013]
101.60 ± 0.33
[1.750 ± 0.013]
44.45 ± 0.33
[1.605 ± 0.011]
40.77 ± 0.27
[0.125 ± 0.011]
3.18 ± 0.27
[3.750 ± 0.014]
95.24 ± 0.35
3X 6-32 UNC 2B
Max Insertion Depth
0.20 (5.0 mm) Both Sides
[0.250 ± 0.012]
3X 6.35 ± 0.31
[4.010 Max]
101.85 Max
4X 6-32 UNC 2B
Max Insertion
Depth 0.22 (5.6 mm)
Note. Dimensions are shown in mm (inches)
[1.028]
26.10
Max
Pin One J4
Pin One J3
Pin One J2
[0.230 ± 0.015]
5.83 ± 0.38
[0.183 ± 0.015]
4.66± 0.38
[3.71± 0.03]
94.3± 0.8
[2.83 ± 0.03]
71.8 ± 0.8
[2.23 ± 0.03]
56.5 ± 0.8
Recommended
case temperature
measurement location
9.28 (0.365)
50.3 (2.00)
Recommended
case temperature
measurement location
