Seagate Barracuda 18LP ST318275LC, Руководство по эксплуатации продукта

Страница: 21 / 96

Barracuda 18LP Product Manual, Rev. E 11
4.4 Prefetch/multi-segmented cache control
The drive provides prefetch (read look-ahead) and multi-segmented cache control algorithms that in many
cases can enhance system performance. “Cache” as used herein refers to the drive buffer storage space when
it is used in “cache” operations. To select prefetch and cache features the host sends the Mode Select com-
mand with the proper values in the applicable bytes in Mode Page 08h (see SCSI Interface Product Manual,
part number 77738479). Prefetch and cache operation are independent features from the standpoint that each
is enabled and disabled independently via the Mode Select command. However, in actual operation the
prefetch feature overlaps cache operation somewhat as is noted in Section 4.5.1 and 4.5.2.
All default cache and prefetch Mode parameter values (Mode Page 08h) for standard OEM versions of this
drive family are given in Tables 9a and 9b.
4.5 Cache operation
In general, all but 100 Kbytes of the physical buffer space in the drive can be used as storage space for cache
operations. The buffer can be divided into logical segments (Mode Select Page 08h, byte 13) from which data
is read and to which data is written. The drive maintains a table of logical block disk medium addresses of the
data stored in each segment of the buffer. If cache operation is enabled (RCD bit = 0 in Mode Page 08h, byte 2,
bit 0. See SCSI Interface Product Manual, part number 77738479), data requested by the host with a Read
command is retrieved from the buffer (if it is there), before any disc access is initiated. If cache operation is not
enabled, the buffer (still segmented with required number of segments) is still used, but only as circular buffer
segments during disc medium read operations (disregarding Prefetch operation for the moment). That is, the
drive does not check in the buffer segments for the requested read data, but goes directly to the medium to
retrieve it. The retrieved data merely passes through some buffer segment on the way to the host. On a cache
“miss”, all data transfers to the host are in accordance with “buffer-full” ratio rules. On a cache “hit” the drive
ignores the “buffer-full” ratio rules. See explanations associated with Mode page 02h (disconnect/reconnect
control) in the SCSI Interface Product Manual.
The following is a simplified description of a read operation with cache operation enabled:
Case A - A Read command is received and the first logical block (LB) is already in cache:
1. Drive transfers to the initiator the first LB requested plus all subsequent contiguous LB’s that are already in
the cache. This data may be in multiple segments.
2. When a requested LB is reached that is not in any cache segment, the drive fetches it and any remaining
requested LBs from the disc and puts them in a segment of the cache. The drive transfers the remaining
requested LBs from the cache to the host in accordance with the disconnect/reconnect specification men-
tioned above.
3. If the prefetch feature is enabled, refer to Section 4.5.2 for operation from this point.
Case B - A Read command requests data, the first LB of which is not in any segment of the cache:
1. The drive fetches the requested LB’s from the disc and transfers them into a segment, and from there to
the host in accordance with the disconnect/reconnect specification referred to in case A.
2. If the prefetch feature is enabled, refer to Section 4.5.2 for operation from this point.
Each buffer segment is actually a self-contained circular storage (wrap-around occurs), the length of which is
an integer number of disc medium sectors. The wrap-around capability of the individual segments greatly
enhances the buffer’s overall performance as a cache storage, allowing a wide range of user selectable config-
urations, which includes their use in the prefetch operation (if enabled), even when cache operation is disabled
(see Section 4.5.2). The number of segments may be selected using the Mode Select command, but the size
can not be directly selected. Size is selected only as a by-product of selecting the segment number specifica-
tion. The size in Kbytes of each segment is not reported by the Mode Sense command page 08h, bytes 14 and
15. The value 0XFFFF is always reported. If a size specification is sent by the host in a Mode Select command
(bytes 14 and 15) no new segment size is set up by the drive, and if the “STRICT” bit in Mode page 00h (byte
2, bit 1) is set to one, the drive responds as it does for any attempt to change unchangeable parameters (see
SCSI Interface Product Manual, part number 77738479). The drive supports operation of any integer number
of segments from 1 to 16.