6. Double-click Disk Utility.
7. Select the Seagate Wireless drive or Seagate USB.
8. Click the Erase button.
9. For Format type, select Windows NT File System (do not select the compressed option).
10. Enter a recognizable name, for example, Seagate Wireless drive.
This is the name that appears on the Desktop when you connect the Seagate Wireless to your Mac.
The Seagate Wireless should be ready to use within a few minutes. You may need to eject the device by
dragging it to the trash can and then disconnect and reconnect it to gain full read and write capability.
You can now set up the Seagate Wireless for your use.
The Seagate Wireless shuts down by itself
Your Seagate Wireless includes a power-save feature, which means that it enters a standby state after 5
minutes of inactivity. Your device automatically returns to active mode whenever someone attempts to
access it.
I know the Seagate Wireless is broadcasting, but I can’t stream from it
Up to three wireless-enabled devices can stream from the Seagate Wireless at one time. To see how many
devices are currently connected to the Seagate Wireless, open the Seagate Media app on a connected
device and tap Users.
The Seagate Wireless beeps when I plug it in to my computer
The battery is low. Keep your Seagate Wireless connected to your computer to charge the device.
Important info: If you are using Time Machine, do not allow the program to use the Seagate
Wireless drive for backup.
17
Seagate Wireless
10/14/15
