Seagate 10K.3 - Savvio 300 GB Hard Drive Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 78

Seagate 10K.3 - Savvio 300 GB Hard Drive Скачать руководство пользователя страница 16

8

Savvio 10K.3 SAS Product Manual, Rev. D

3.7

Factory-installed options

You may order the following items which are incorporated at the manufacturing facility during production or

packaged before shipping. Some of the options available are (not an exhaustive list of possible options):
• Other capacities can be ordered depending on sparing scheme and sector size requested.

• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection

against transit damage. Units shipped individually require additional protection as provided by the single unit

shipping pack. Users planning single unit distribution should specify this option.

• The

Safety and Regulatory Agency Specifications

, part number 75789512, is usually included with each

standard OEM drive shipped, but extra copies may be ordered.

«
...
14
15
16
17
18
...
»

Содержание 10K.3 - Savvio 300 GB Hard Drive















































































Отзывы:

Нет отзывов