manualshive.com logo in svg

Seagate 10K.3 - Savvio 300 GB Hard Drive, Руководство по эксплуатации продукта, Страница: 14 / 78

Поделиться
Скачать
Seagate 10K.3 - Savvio 300 GB Hard Drive Скачать руководство пользователя страница 14

6

Savvio 10K.3 SAS Product Manual, Rev. D

3.1

Standard features

Savvio

®

 10K.3 SAS drives have the following standard features:

• 1.5 / 3 / 6

 

Gbit Serial Attached SCSI (SAS) interface

• Integrated dual port SAS controller supporting the SCSI protocol
• Support for SAS expanders and fanout adapters

• Firmware downloadable using the SAS interface

• 128 - deep task set (queue)

• Supports up to 32 initiators

• Jumperless configuration

• User-selectable logical block size (512, 520, or 528 bytes per logical block)

• Industry standard SFF 2.5-inch dimensions

• Programmable logical block reallocation scheme 

• Flawed logical block reallocation at format time 

• Programmable auto write and read reallocation

• Reallocation of defects on command (Post Format) 

• ECC maximum burst correction length of 520 bits

• No preventive maintenance or adjustments required 

• Dedicated head landing zone and automatic shipping lock

• Embedded servo design

• Self diagnostics performed when power is applied to the drive 

• Zone bit recording (ZBR) 

• Vertical, horizontal, or top down mounting 

• Dynamic spindle brake 

• 16 Mbyte data buffer (see Section 4.5)

• Drive Self Test (DST)

• Background Media Scan (BMS)

• Idle Read After Write (IRAW)

• Power  Save

Savvio

®

 10K.3 SAS Self-Encrypting Drive models have the following additional features:

• Automatic data encryption/decryption

• Controlled access

• Random number generator

• Drive locking

• 16 independent data bands

• Cryptographic erase of user data for a drive that will be repurposed or scrapped

• Authenticated firmware download

3.2

Media description

The media used on the drive has an aluminum substrate coated with a thin film magnetic material, overcoated 

with a proprietary protective layer for improved durability and environmental protection.

Содержание 10K.3 - Savvio 300 GB Hard Drive















































































Отзывы:

Нет отзывов