Seagate IronWolf Product Manual, Rev. A
21
Drive Specifications
2.13.3 Taiwan Requirements — Taiwan RoHS
Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI) requirements in standard CNS
15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Seagate
products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective January 1, 2018.
This product is Taiwan RoHS compliant.
The following table meets the Section 5 of CNS 15663, “Marking of presence” requirements.
2.14
Corrosive environment
Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial
environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this
accelerated testing cannot duplicate every potential application environment. Users should use caution exposing any
electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component
reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate
products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the
most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the
printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in
cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated.
The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free
alternatives.
Table 6 Taiwan - Restricted Substances
設備名稱：硬碟設備，型號 :
Equipment Name: Hard Disk Device, Type Designation:
單元
Unit
限用物質及其化學符號
Restricted Substance and its chemical symbol
鉛
(Pb)
汞
(Hg)
鎘
(Cd)
六價鉻
(Cr+6)
多溴聯苯
(PBB)
多溴二苯醚
(PBDE)
頂蓋
Top Cover
—
O
O
O
O
O
磁碟
Magnetic disk
—
O
O
O
O
O
電機底座組件
Motor Base Assembly
—
O
O
O
O
O
印刷電路板组装
PCB Assembly
—
O
O
O
O
O
備考 1. "O" 係指該项限用物質之百分比含量未超出百分比含量基準值。
Note 1
.
"O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of
presence.
備考 2. "—" 係指該项限用物質為排除項目。
Note 2
.
"—" indicates that the restricted substance corresponds to the exemption.
